TY - JOUR

T1 - The gas diffusion electrode setup as a testing platform for evaluating fuel cell catalysts

T2 - A comparative RDE‐GDE study

AU - Nösberger, Sven

AU - Du, Jia

AU - Quinson, Jonathan

AU - Berner, Etienne

AU - Zana, Alessandro

AU - Wiberg, Gustav K.h.

AU - Arenz, Matthias

PY - 2023

Y1 - 2023

N2 - Gas diffusion electrode (GDE) setups have been recently introduced as a new experimental approach to test the performance of fuel cell catalysts under high mass transport conditions, while maintaining the simplicity of rotating disk electrode (RDE) setups. In contrast to experimental RDE protocols, for investigations using GDE setups only few systematic studies have been performed. In literature, different GDE arrangements were demonstrated, for example, with and without an incorporated proton exchange membrane. Herein, we chose a membrane-GDE approach for a comparative RDE–GDE study, where we investigate several commercial standard Pt/C fuel cell catalysts with respect to the oxygen reduction reaction (ORR). Our results demonstrate both the challenges and the strengths of the new fuel cell catalyst testing platform. We highlight the analysis and the optimization of catalyst film parameters. That is, instead of focusing on the intrinsic catalyst ORR activities that are typically derived in RDE investigations, we focus on parameters, such as the catalyst ink recipe, which can be optimized for an individual catalyst in a much simpler manner as compared to the elaborative membrane electrode assembly (MEA) testing. In particular, it is demonstrated that ∼50% improvement in ORR performance can be reached for a particular Pt/C catalyst by changing the Nafion content in the catalyst layer. The study therefore stresses the feasibility of the GDE approach used as an intermediate “testing step” between RDE and MEA tests when developing new fuel cell catalysts.

AB - Gas diffusion electrode (GDE) setups have been recently introduced as a new experimental approach to test the performance of fuel cell catalysts under high mass transport conditions, while maintaining the simplicity of rotating disk electrode (RDE) setups. In contrast to experimental RDE protocols, for investigations using GDE setups only few systematic studies have been performed. In literature, different GDE arrangements were demonstrated, for example, with and without an incorporated proton exchange membrane. Herein, we chose a membrane-GDE approach for a comparative RDE–GDE study, where we investigate several commercial standard Pt/C fuel cell catalysts with respect to the oxygen reduction reaction (ORR). Our results demonstrate both the challenges and the strengths of the new fuel cell catalyst testing platform. We highlight the analysis and the optimization of catalyst film parameters. That is, instead of focusing on the intrinsic catalyst ORR activities that are typically derived in RDE investigations, we focus on parameters, such as the catalyst ink recipe, which can be optimized for an individual catalyst in a much simpler manner as compared to the elaborative membrane electrode assembly (MEA) testing. In particular, it is demonstrated that ∼50% improvement in ORR performance can be reached for a particular Pt/C catalyst by changing the Nafion content in the catalyst layer. The study therefore stresses the feasibility of the GDE approach used as an intermediate “testing step” between RDE and MEA tests when developing new fuel cell catalysts.

U2 - 10.1002/elsa.202100190

DO - 10.1002/elsa.202100190

M3 - Journal article

VL - 3

JO - Electrochemical Science Advances

JF - Electrochemical Science Advances

SN - 2698-5977

IS - 1

M1 - e2100190

ER -